Product ID:LOW VOC GREEN EPOXY PART B
MSDS Date:09/16/1988
FSC:8010
NIIN:00N025385
Kit Part:Y
MSDS Number: BMPMH

EVERSEAL MFG CO INC

475 BROAD AVE
RIDGEFIELD, NJ 07657
US

Emergency Phone: 201-943-4986

Info Phone: 201-943-4986

Preparer: FRANK PRIMERANO

Cage: 72988

EVERSEAL MFG CO INC

RIDGEFIELD, NJ 07657-2329 US

Telephone: 201-943-4986

Cage: 72988

EPOXY RESIN; (RESIN-EPOXY)

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 61%

<0.1.

CAS: 68609-96-1

Fraction By Weight: 6%

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 14 - 21%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

4.5.

CAS: 110-12-3

RTECS: MP3850000

Fraction By Weight: 14%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

15.

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 2%

OSHA PEL 100 PPM/75 STEL

ACGIH TLV: 50 PPM/75 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ADDITIVES

Fraction By Weight: 3 - 5%

LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: DIZZINESS, NAUSEA, POSSIBLE
UNCONSCIOUSNESS. SKIN & EYES: IRRITATION. POSSIBLE SENSITIZER.
PROLONGED AND/OR EXCESSIVE EXPOSURE TO DUST FROM SANDING, GRINDING
OR BLASTING MAY CAUSE LUNG DISORDER S.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL: REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION IF
NEEDED. SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER FOR
AT LEAST 15 MINUTES. INGEST: CALL MD IMMEDIATELY .

Flash Point:45.0F,7.2C
Lower Limits:1.0%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WATER NOT A SUITABLE EXTINGUISHING
MEDIUM.

Spill Release Procedures:ENSURE ADEQUATE VENTILATION. REMOVE IGNITION
SOURCES. ABSORB SMALL SPILLS ON DRY ABSORPTION MATERIALS. USE
SPARK-PROOF SCOOP FOR LARGER SPILLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID EXCESSIVE HEAT. KEEP FROM OPEN
IGNITION SOURCES.
Other Precautions:NPCA/HMIS RATING 3,3,O,H. OPERATORS SHOULD WEAR
PROTECTIVE GEAR ON EXPOSURE TO DUST FROM SANDING, GRINDING OR
BLASTING.

Respiratory Protection:NIOSH/MSHA APPROVED VAPOR CARTRIDGE MASK OR AIR-
SUPPLIED HOOD.
Ventilation:SUFFICIENT TO ENSURE LEL NOT ACHIEVED.
Protective Gloves:IMPERVIOUS GLOVES RECOMMENDED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECT SKIN WITH CLOTHING OR BARRIER CREAM.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:F3
Boiling Pt:B.P. Text:232F,111C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.01
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:39

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:CO & CO2 ON COMBUSTION.

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE PER LOCAL, STATE
AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.